|
Using this page you can customize the
ribs automatically created for each side of every Block:
You can for example then attach a rib to the root side of the first Block, to
make it stronger where it touches the fuselage.
You can select for each rib which elements you want to apply (sheeting, spars,
holes and so on). When you then go to create the cut to Shape the Block (the
added shaping job to cut the vertical (or almost vertical...) Root and Tip
sides of a block, you can also specify an offset to take account of the rib
thickness.
You can then print/export the ribs or cut them with a 3 axis milling CNC
|
